1. Straight curved hinge
The door panel covers the entire 18mm thick side panel of the cabinet (that is, the door panel covers the side panel 17mm), and the hinge used is the straight bending hinge.
2. Middle curved hinge
The door panel covers half of the 18mm thick side panel of the cabinet (that is, the door panel covers the side panel 8mm), and the hinge used is the middle-bend hinge.
3. Large curved hinge
The door panel does not cover the side panel of the cabinet at all (that is, the door panel covers the side panel by 0mm), and the hinge used is the large curved hinge.
4. 165° straight curved hinge
The 165° straight-bending hinge is the same as the ordinary straight-bending hinge, but the opening angle of the door panel is different. The opening angle of the ordinary straight-bending hinge door panel is 90°, and the opening angle of the 165° straight-bending hinge door panel is 165°.
5. 165° large bending hinge
The 165° large-bend hinge is the same as the ordinary large-bend hinge, but the opening angle of the door panel is different. The opening angle of the ordinary large-bend hinge door panel is 90°, and the opening angle of the 165° large-bend hinge door panel is 165°.
6. 60° hinge
The 60° hinge is only used for the connection in the middle of the hinged door panel of the corner cabinet.
The hinge hole of the linkage door is opened on the same door panel, and the door panel on the side where the handle is installed has no hinge hole.
7. American hinge
The installation method of the American hinge is special. The base part of the hinge is fixed on the fixed sealing plate on the same plane as the door panel. It is often used for the in-line cabinet as the corner cabinet, and part of the cabinet is used for the fixed sealing plate.
8. Flat hinge
Flat hinges are designed for flip-down doors and are used in conjunction with flip-down supports.